Penofin Pro-Tech Stripper (Step #1):

• Specially developed to effectively remove oil finishes on all wood surfaces using New Clean Strip Technology. Pro-Tech Stripper leaves little or no residue and provides double the coverage of average strippers. This product is ready to use, 100% Biodegradable, nonflammable and CERTIFIED NO VOCs. Pro-Tech Stripper is the first step in preparing your wood for a beautiful Penofin application.
• Surface Preparation: Use Penofin Pro-Tech Stripper at temperatures when wood is not hot to the touch. To remove any debris, sweep or use a power blower. Protect bordering metal and glass surface and tape off any areas no being stripped. Dampen surrounding vegetation with water.
• Application: Shake product well before using. Do not thin or blend with other products. Wet the surface to be stripped. Apply a generous coat with a brush, roller, or garden sprayer. Penofin Pro-Tech Stripper will soften and or dissolve most coatings in 15-30 minutes. Keep the wood surface wet by occasional misting. Scrub the surface with a nonmetallic bristle brush. Rinse thoroughly with water using a garden hose with a spray attachment (pressure washing is not recommended). To achieve best results for perfect preparation for Penofin wood finish, follow-up with Penofin Pro-Tech Cleaner (Step #2) followed by Penofin Pro-Tech Brightener (Step #3).
• ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION, AND SOLID SHOES WHEN APPLYING. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER. DO NOT MIX IN A METAL CONTAINER. DO NOT STORE DILLUTED SOLUTION. DO NOT MIX WITH CHLORINE BLEACH OR OTHER CHEMICALS. HARMFUL OR FATAL IF SWALLOWED. CAN CAUSE EYE AND SKIN BURNS.
• Average coverage: Approximately 75 square feet per quart (Kit includes 1 quart of Stripper).

Penofin Pro-Tech Cleaner (Step #2):

• The best outdoor cleaner for just about everything, this unique formula uses Super Hydrogen Power to tackle almost any cleaning job around your home. Mix these concentrated granules to effectively remove grease, grim, dirt, organic stains, tree sap and mineral deposits. For use on wood, masonry, concrete, fiber cement, fiberglass, outdoor furniture, cushions and floor coverings, glass and tile. This product is biodegradable, nonflammable and contains no VOCs.
• Surface Preparation: Brush any debris from the surface of the wood. If the surface has been treated with a coating, use Penofin Pro-Tech Stripper (Step #1) to prepare the area. Penofin Pro-Tech Cleaner is most effective at temperatures where wood is not hot to the touch. Protect bordering metal surfaces when using at high concentrations. Dampen surrounding vegetation with water.
• Application: Pour the contents of this package into one gallon of clean water and mix. Mist the surface with a garden hose and sprayer. Using a pump up garden sprayer, brush or mop, apply the solution liberally. For best results DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Mist occasionally and agitate with a broom or nonmetallic stiff bristled brush for ten to fifteen minutes. Rinse thoroughly with water.
• For wood surfaces: Follow the application with Penofin Pro-Tech Brightener (Step #3), to remove any tannin stains, and to return the wood to its proper pH before staining with Penofin Verde Oil (not included in this kit).

Penofin Pro-Tech Brightener Instructions (Step #3):

• Annihilates tough tannin stains and watermarks on all types of wood surfaces. Penofin Pro-Tech Brightener reestablished the pH balance of your wood after stripping and cleaning and brightens fray weathered wood to bring back that mill-bright color. This package contains enough Penofin Pro-Tech Brightener to make 1 gallon of brightening solution. This product is biodegradable and contains no VOCs.
• Surface Preparation: Clean the wood surface of any debris. Use Penofin Pro-Tech Stripper if needed to remove old stain and Penofin Pro-Tech Cleaner to prepare the area. Penofin Pro-Tech Brightener is most effective at temperatures where wood is not hot to the touch. Protect bordering metal surfaces. Dampen surrounding vegetation with water.
• Application: Pour the contents of this package into one gallon of clean water and mix. Wet the surface with a garden hose and sprayer. Using a plastic pump up garden sprayer or non-metallic brush, apply the solution liberally. Wait 15 minutes and let it do the work for you. DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Scrub and rinse thoroughly with water.
• ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION, AND SOLID SHOES WHEN APPLYING. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER. DO NOT MIX IN A METAL CONTAINER. DO NOT STORE DILLUTED SOLUTION. DO NOT MIX WITH CHLORINE BLEACH OR OTHER CHEMICALS. HARMFUL OR FATAL IF SWALLOWED. CAN CAUSE EYE AND SKIN BURNS.
• Average gallon coverage: 75-100 square feet depending on surface type. (Brightener included in this kit will make 1 gallon of brightening solution.)