Penofin Pro-Tech Brightener Instructions:

• Annihilates tough tannin stains and watermarks on all types of wood surfaces. Penofin Pro-Tech Brightener reestablished the pH balance of your wood after stripping and cleaning and brightens fray weathered wood to bring back that mill-bright color. This package contains enough Penofin Pro-Tech Brightener to make 1 gallon of brightening solution. This product is biodegradable and contains no VOCs.
• Surface Preparation: Clean the wood surface of any debris. Use Penofin Pro-Tech Stripper (not included in this kit) if needed to remove old stain and Penofin Pro-Tech Cleaner (not included in this kit) to prepare the area. Penofin Pro-Tech Brightener is most effective at temperatures where wood is not hot to the touch. Protect bordering metal surfaces. Dampen surrounding vegetation with water.
• Application: Pour the contents of this package into one gallon of clean water and mix. Wet the surface with a garden hose and sprayer. Using a plastic pump up garden sprayer or non-metallic brush, apply the solution liberally. Wait 15 minutes and let it do the work for you. DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Scrub and rinse thoroughly with water.
• ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION, AND SOLID SHOES WHEN APPLYING. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER. DO NOT MIX IN A METAL CONTAINER. DO NOT STORE DILLUTED SOLUTION. DO NOT MIX WITH CHLORINE BLEACH OR OTHER CHEMICALS. HARMFUL OR FATAL IF SWALLOWED. CAN CAUSE EYE AND SKIN BURNS.
• Average gallon coverage: 75-100 square feet depending on surface type. (Brightener included in this kit will make 1 gallon of brightening solution.)

Penofin Verde Instructions:

• Application: SHAKE WELL AND STIR THOUROUGHLY. DO NOT THIN OR BLEND WITH OTHER PRODUCTS. DO NOT APPLY WHEN WOOD IS HOT TO THE TOUCH OR AT TEMPERATURES BELOW 45 DEGREES. DO NOT ALLOW TO FREEZE. Apply with brush or rag to clean, dry, bare seasoned or kiln dried wood of any species. Do not prepare the surface with steel wool. Apply one coat and wait 15 to 20 minutes for it to penetrate the wood. Thoroughly wipe the entire surface with a nap-free cloth until the wood feels dry to the touch. Any excess oil left on the surface will congeal and result in a tack finish. For rough-sawn wood, back brush with a dry paint brush to remove surface product.
• Coverage: Coverage for one gallon will vary from 250-500 square feet depending on the surface texture, moisture content, and method of application. (Verde Oil included in this kit is 1 quart which is equal to .25 gallons, therefore coverage per quart would be from 62.5-125 square feet)