Napoleon 10′ Natural Gas Hose with 3/8″ Quick Connect — Frequently Asked Questions
What is the Napoleon 10′ Natural Gas Hose with 3/8″ Quick Connect?
This is a 10-foot natural gas extension hose made by Napoleon, featuring a 3/8″ quick-connect fitting (part S85002). It allows more flexibility in positioning your grill relative to a gas line.
What are its specifications and features?
• Length: 10 feet (approximately 103 cm)
• Quick-connect fitting: 3/8″ (1.27 cm)
• Model / part number: S85002 (Napoleon)
• Suitable for natural gas systems; intended for use with compatible Napoleon gas grills or gas line setups
• Used to extend the reach of the original gas connection, giving more placement flexibility to your setup
How do I install and use it safely?
1. Turn off the gas supply before disconnecting any existing hose or fitting.
2. Attach the quick-connect end to your grill’s natural gas inlet (if it matches 3/8″ QC).
3. Attach the other end to your gas line or regulator (as per your setup).
4. Turn gas back on and check all connections for leaks using a soapy water solution.
5. If you detect bubbles, tighten or re-seat the connections before use.
How should I care for and maintain it?
• Inspect the hose periodically for signs of wear, cracking, or damage.
• Check the quick-connect fitting for corrosion or debris, and clean gently if needed.
• When storing or during off-season, avoid sharp bends or kinks that could weaken the hose.
• If the hose shows significant damage or leaks, replace it rather than attempting patch repairs.
What are the advantages and limitations of this hose?
Advantages:
• Provides extra length (10′) so your grill can be placed farther from the gas line
• Uses a standard 3/8″ quick-connect fitting for easy attachment and detachment
Limitations / cautions:
• Only suitable for natural gas systems—not propane (unless specifically rated for it)
• The gas flow capacity is limited by the hose inner diameter and fitting size — too long or too many fittings may reduce gas pressure
• Quick-connect fittings must be clean, undamaged, and correctly sealed to prevent leaks
• Always follow local codes and manufacturer guidelines for gas line installation
