FireBoard Drive Blower G3 — Frequently Asked Questions
What is the FireBoard Drive Blower G3?
The FireBoard Drive Blower G3 is a **variable-speed 20 CFM blower** designed to provide precise airflow control for smokers and grills, used in conjunction with FireBoard “Drive” controllers (such as the FireBoard 2 Drive).
What are its specifications and features?
• Maximum flow: **20 CFM**
• Power: 12 VDC, 0.68 A (~ 8 W)
• Cable: braided stainless steel, ~ 4.5 ft (1.4 m) length
• Connector: 2.5 mm ID plug
• Construction: stainless steel frame & hardware, high-heat resistant molded cover and fan
• Adapter plates: breakaway / rotatable plates for multiple vent sizes (e.g. small/medium, large/XL)
• Built-in rotating damper for fine airflow tuning
• Note: Does *not* include the Drive Fan Control Cable; required for some FireBoard setups.
How do I install the blower and ensure compatibility?
1. Determine the vent opening or port on your smoker/grill and choose the appropriate adapter plate (small/medium or large/XL).
2. Loosen the thumb screws on the blower body, slide in the adapter plate into the mounting rails, and secure it.
3. Connect the blower’s 2.5 mm plug to your FireBoard Drive controller (or use the Drive Fan Control Cable if required).
4. If your setup uses a ball valve or nozzle adapter (e.g. for drum or cabinet smokers), use the G3-compatible adapter. (Note: previous adapters from older blower models may not be compatible)
5. Power up and test airflow; adjust the built-in damper to fine-tune airflow control.
What are the limitations or important compatibility notes?
• The blower requires a **Drive-enabled FireBoard controller** to regulate fan speed. Standalone or older FireBoard models may require the additional Drive Fan Control Cable.
• The blower’s G3 model uses a newer adapter architecture — some older adapter types (like older ball valve adapters) are *not* compatible.
• For maximum airflow or extreme cooking conditions, external power may be required.
• Always confirm the smoker vent dimensions and match to adapter plates to avoid leaks or airflow losses.
Does using this blower void any warranties or pose risks?
Since this is an official FireBoard accessory, using it properly should **not** void your equipment’s warranty. Just ensure it’s correctly installed, mounted securely, and wires are protected. Always follow installation and safety guidelines. FireBoard designed the G3 with improved durability and stainless steel build to withstand outdoor conditions.
